Aluminum Alloy Come Along Clamp For ACSR

Aluminum Alloy Come Along Clamp is mainly composed of movable jaw base, connecting plate, pull ring, fixed jaw (lower jaw), movable jaw (upper jaw), body and other components. Strengthening the hook can improve the overall stress condition of the Come Along Clamp and make it more safe and reliable. The aluminum alloy wire grip is used to hold the unfolded wire or ground wire and optical cable after the completion of stringing operation or tension operation, so as to complete relevant operation on the line. According to the use, Conductor Clamp, Ground Wire Come Along Clamp, Optical Cable Come Along Clamp and Wire Rope Come Along Clamp are classified.

Technical principle:

After the Conductor Grip holds the ground wire, the tension is applied to the pull ring, and the sliding shaft of the pull ring slides in the body wire slot, and drives the connecting plate, and the movable jaw seat rotates accordingly. Because the other end of the movable jaw seat is hinged firmly with the jaw, when rotating, the movable jaw is forced to press down along the pin shaft, and the cable is pressed on the fixed jaw seat. The greater the tension on the pull ring, the greater the downward pressure on the movable jaw, so as to ensure that the ground wire is tightly clamped by the movable jaw and the fixed jaw.

Aluminum alloy wire clamp

Aluminum alloy conductor grip is mainly made of LC4 high-strength aluminum alloy die forging, with light weight. It has the advantages of high strength and no damage to the surface of conductor by clamping conductor. 

Application:

Suitable for clamping conductor without insulating sheath.

Features:

Made of high strength aluminum alloy forging die, light weight and high strength. The conductor surface will not be damaged when the conductor is clamped.

Product Parameters

Overhead Transmission Line Construction Tool Conductor Grip Aluminum Alloy Come Along Clamp

Contact me and "SEND" inquiry if you are interested in it.