Fiberglass Duct Rodder is selected as a special tool for pulling electric cables and optical fiber cables in telecom, power industries, buildings and many other fields. The rod is made of fiberglass and high strength resin at high temperature, it is coated by high density polyethylene engineering plastic as its protected layer, which makes the duct rodder cover sliding on surface, durable, corrosion resistant and has good insulation performance, these make it safe for using in cable occupied duct. Along with pull head and handcart, it features easy to move and operate.
The FRP push pull rod will be equipped with different size of reels in accordance with the length of the rod, there are wheels on the reel to make it convenient for moving, it is an ideal tool for laying cables.The fiberglass duct rodder is widely used in the fields of telecommunication, electric power, water conservancy, etc. For its high tensile strength, wear-resistant surface and elastic body, the Snake Duct Rod is also an ideal tool for underground jobs, such as pulling cables and lines through conduits, tubes, pipes or ducts.
Features:
1. FRP Snake Rod has light weight, durable, good resistance to chemical and corrosion.
2. High tensile strength and bending properties to make it go through narrow pipes easily, good temperatures adaptability.
3. FRP Duct Rodder will not soften in hot weather nor become brittle in cold weather.
4. Its usability will not be affected by temperature rod jacket, developed composite materials, hard, smooth and wear-resistant.
Good flexible and tracing make the duct rods have good effective to finish the snake and electric conduction in the electric cable tubes. Specification | Rod Diameter (mm) | 4.5mm-18mm |
Rod Length (m) | 30-500m or even more length in drum |
Frame Spec. (mm) | 1.5mm-2mm |
Material | Fiber glass rod inner | Extruded by fiber glass and high strength resin at high temperature |
Fiber glass rod outer | High Density polyethylene coating |
Metal Frame | Steel with high-temperature sprayed plastic or hot dip galvanized |
Physical Property | Fiber glass content | 75-80% |
Density | > 1.9gr/cm3 |
Working environment | -40℃ to +80℃ |
Max. Pulling strength | 4000N +/-5% |
Consistency of rod | 137gr/m |
Flexural Modulus | > 46.500Mpa |
Elongation at break | 2.5-3% |
Min Bending Radius | 388mm |
Duct rodder sizes:
Many sizes and color for you choose.
SPECIFICATIONS:
1) 4.5MM*50M/60M/80M/100M
2) 5MM*50M/60M/80M/100M
3) 6MM*60M/80M/100M/120M
4) 8MM*100M/150M/200M
5) 9MM*150M/200M/250M/300M
6)10MM*150M/200M/250M/300M
7) 11MM*200M/250M/300M/350M
8) 12MM*200M/250M/300M/350M
9)13MM*200M/250M/300M/350M
10) 14MM*250M/300M/350M/500M
11) 16MM*250M/300M/350M/500M
Tips:
Diameter rod from 4.5mm to 16mm; Length rod from 30mm to 500mm.